Having your desktop computer on the floor is a great way to free up desk space, but it’s not without issues. Carpets trap dust and can even choke bottom intake fans if the case doesn’t have enough clearance. That’s where the best PC tower stands help; by raising your rig away from all that nasty carpet, you get all the benefits of a floor-bound computer with fewer issues.

There are a ton of similar—if not identical—products out there, so we’ve opted to focus on a handful of different categories, with one pick each. Let’s get started.

Our Favorite PC Tower Stands for Carpet Floors

Before we start, it’s important to point out that you should get a stand that fits your entire case if you’re buying one without a ventilated platform. Having all four case feet on the stand means that they can do their job of lifting your case slightly to provide an air gap for your bottom intake fans (including your all-important PSU fan).

Leaving one (or both) ends hanging off the stand may impede airflow by reducing the air gap, which will impede airflow and may raise temperatures if you use bottom intakes.

1. Seloom Computer Tower Stand

Seloom’s computer tower stand is one of the most basic computer tower stands you can buy. It’s nothing more than a stainless steel frame with wheels attached, but that isn’t a bad thing at all. The simplicity keeps the price down while ensuring your case’s ventilation works as it should.

Our favorite feature of the Seloom computer stand is that it comes with adjustable steel tubes for depth and width. The Seloom adjusts between 7.5 x 15.7 inches at its minimum to 13.4 x 21.3 inches at max, enough for most modern tower cases. You will have to watch out for the 60 lbs load limit, but that likely won’t be an issue for most computer towers.

Beyond the adjustable width and depth, the Seloom’s best selling point is its totally unrestrictive design without steel sides or floors to impede airflow. This is, of course, vital if you have side- or bottom-mounted intakes in your airflow setup, but it’s also beneficial for your PSU’s intake fan. That fan will draw air from the bottom in most modern cases, so it’s important to give it breathing room.

This open design means you do run the risk of your tower tipping over, of course. However, the small lip on each of the four ABS plastic corners should help keep your tower upright after minor accidental knocks. Seloom includes some non-slip tape to help keep your case attached to the stand, although we wouldn’t rely on it to save your PC from a strong push.

The only downside we can see is that you only get two locking caster wheels, but that’s not going to be a big problem for most. Besides that minor quibble, we think the Seloom computer tower stand’s price and features make it the best PC tower stand for most users.

2. IO Crest Computer Stand

IO Crest’s computer stand is perfect if you’re anxious about your tower’s safety and want some support to ensure it doesn’t tip over. The IO Crest stand’s side wings keep your rig upright, while its decent range of adjustment and 200-pound weight limit ensures almost any rig will fit.

The IO Crest PC stand consists of a base plate that’s 13 inches wide and 9.88 inches deep. The side supports screw into the base plate via slots that allow for width adjustment between 5 and 13 inches. Unfortunately, there’s no depth adjustment, so those with particularly long towers may need to buy two for adequate support.

As the IO Crest’s side panels are only 3.5 inches tall, they shouldn’t interfere with any side intakes or exhausts you may have on your case. Bottom intakes are more of an issue due to the solid panel, so heed our earlier advice and ensure your entire case fits on the stand. This may, again, require buying two if you have a particularly long computer.

The wheels on the IO Crest stand are also a minor issue. While we appreciate the inclusion of two double-locking wheels, the included ones aren’t very smooth and feel somewhat stiff. They’re fine if you only occasionally move your computer, but those who do so regularly should look elsewhere.

The IO Crest computer stand isn’t perfect, but it’s a solid option if you want side supports for safety. It supports wider towers than competing stands of this style and has the weight limit to match, making it one of the best computer tower stands of this style. Sure, you may need two for a really beefy case, but they at least won’t set you back too much.

3. Eureka Ergonomic Height Adjustable Computer Tower Stand

If you’re looking for a dual-purpose computer stand, then the Eureka Ergonomic two-tier stand is what you want. It’s a rolling steel frame with a height-adjustable top tier, making it an adaptable computer stand that works for various setups.

The main selling point of Eureka Ergonomic’s two-tier stand compared to cheaper rivals is that you get about 3 inches of height adjustment, from 22 9/16 inches to 32 11/16 inches. This lets you store it under your desk as a conventional computer stand or raise it to use the top panel as extra desk-height storage.

It also means that the Eureka has enough room to fit larger cases than most two-tier computer stands. The Eureka is 13.8 inches wide and 25.2 inches deep, enough room for all but the largest full-tower cases. The stand has a maximum weight capacity of 88.2 pounds; combine that with its four lockable wheels and you have a PC stand that should endure even a bulky water-cooled build.

Eureka ships its two-tier PC tower stand with a mousepad attached to the top surface, letting you use it as a mouse surface if you want. We think it’s more of a gimmick than anything, but feel free to try it out to see if you enjoy it. Those who game with a keyboard tray may find it valuable, as the shelf gives you more mouse room than you’d get otherwise.

The stand’s dual-purpose cross-brace is much more beneficial. It keeps the frame rigid and stable and doubles as a DIY pegboard for hanging anything from gaming headphones to a surge protector. It’s nothing groundbreaking, but it’s a clever use of a panel that would otherwise only serve a structural purpose.

Overall, the Eureka Ergonomic Height Adjustable Computer Tower Stand is the best PC tower stand for those who want the utility of a two-tiered stand. It’s not the cheapest on the market, but we think it’s justifiable given the versatility and decent three-year warranty.

4. ORICO Computer Tower Stand

Adjustable computer stands are great, but there’s always the chance of the adjustment points failing over time due to repeated use. If you’re worried about that, it might be a good idea to go for a non-adjusting stand instead. There are a few out there, but we believe the ORICO Computer Tower Stand is one of your best options.

As it’s a non-adjusting computer stand, there isn’t much to the ORICO. You get a thick ABS platform with an open end for sliding in your PC and a small lip around the other edges. The lip won’t protect your case from a firm push, but it should be adequate for minor accidental bumps. You also get two locking caster wheels, standard for computer tower stands at this price point.

The ORICO fits cases up to 8.74 inches wide and 17.87 inches long and has a weight limit of 55 pounds. It’s not big enough for a large mid-tower, but smaller mid-towers and Mini-ITX cases should fit the ORICO with no issues.

Overall, there’s nothing much to complain about with the ORICO Computer Tower Stand. It’s a basic stand that’ll do a great job as long as your computer fits. Its roughly $30 MSRP feels a bit pricey for what it is, but the above-average material quality and 12-month warranty help justify the price.

If you don’t need the protective lip, ORICO sells a lipless version for slightly cheaper.

5. Monoprice Multimedia Desktop Stand

Most of the best PC stands have wheels, letting you move your desktop around easily, even on the carpet. But wheels are another point of failure that you may not want to deal with if you’re not interested in moving your rig regularly. If that sounds like you, this Monoprice glass stand may be what you need.

Monoprice markets it as a “multimedia” stand for desktop use, but a glance at the specs shows that it’s large and sturdy enough to support a computer tower. At 22 inches long and 9.5 inches wide, it’s big enough for a mid-tower case. The solid piece of glass is also sturdy, with a 66-pound weight limit that should be enough for an air-cooled mid-tower build.

The four metal feet stand 2.75 inches tall, with room for an extra inch of height if needed. It has no performance- or cooling-related benefit, so we recommend leaving them at their default height to minimize stress on the legs. As with any unventilated computer case stand, ensure that all four feet are on the base to provide an air gap for any bottom intake fans.

Overall, the Monoprice Multimedia Desktop Stand is a surprisingly sturdy, spacious product. While it’s designed for monitors and other desktop peripherals, it’ll double as a perfectly adequate desktop PC stand for carpet and other flooring.

Before You Buy

Do You Need a Computer Tower Stand?

Computer tower stands are by no means a must-have accessory. However, they can help minimize the potentially problematic side effects of keeping a desktop PC on a carpeted floor. Your floors are often the dustiest part of the house, so having a floor-bound PC can lead to more dust entering your computer than you would otherwise have if it were on your desk.

Of course, the dust filters on modern cases help mitigate this significantly. But you’ll still have to clean those dust filters, and having a PC on the floor likely means more regular cleaning than if you were to raise it higher.

However, the bigger benefit of a computer tower stand is that it can help avoid airflow issues related to your bottom intake fans. While almost all cases come with feet designed to create an air gap for your bottom fans, they may not be tall enough if you have a particularly thick carpet.

What happens then is a minimal (or nonexistent) bottom air gap, reducing airflow and potentially choking any bottom-mounted intake fans. A good computer tower stand helps by creating a larger air gap (if it’s ventilated) or providing a flat platform that won’t intrude on the case’s default bottom clearance.

Now, let’s look at a couple of factors you’ll want to consider if you’re in the market for a computer tower stand.

Dimensions and Durability

Whether you’re going for a fixed-size computer tower stand or an adjustable one, make sure your PC tower stand fits your rig. Ideally, you want all four feet on the platform to minimize stresses on the chassis and keep that all-important bottom air gap present. In some situations, this may require buying two stands if you have a particularly long mid- or full-tower case.

Your stand’s weight limit is also crucial. While there’s no easy way to test for long-term durability, you should ensure that the stand can at least support your rig’s total weight. That way, you’re not asking it to handle a load the manufacturer didn’t plan for.

Mobility

Most computer tower stands come with wheels to make moving your computer easier. While that may not seem like much, it can be handy if you need to (dis)connect cables from the motherboard or GPU ports. Just wheel the rear around, and you’ll get access to your rear panel ports quickly and easily.

DIY Alternatives

If you’re handy with tools, you can easily assemble a DIY computer tower stand with a suitably-sized wood plank and some feet or casters. If you’re looking for something really quick, you could also just prop up the front and back of your case on some 2×4, bricks, books, or anything similar. It won’t be pretty, but it’ll do the job if you only need to raise it higher.

That said, if you have to buy any of these supplies, you should buy one of the items on our list instead. Our top pick, for example, will only set you back $19 or so, so it’s not like there are huge savings to be made by going the DIY route.

The main benefit of DIY is assembling something that’ll look much better than most off-the-shelf options. Check this video for inspiration:

Closing Thoughts

Computer tower stands can be surprisingly beneficial if you’re keeping your desktop on a carpeted floor due to space constraints. From simple conveniences such as easy mobility to benefits such as improved cooling and dust avoidance, the best computer tower stands can help you avoid the main challenges carpet will pose to a powerful gaming rig.

Our top pick, the Seloom Computer Tower Stand, should be where most of you start. It’s a simple product, but its unfettered ventilation and fully-adjustable design make it the most adaptable to many situations. But if you’ve spent the money on a massive high-end rig, you might as well go for the Eureka Ergonomic Height Adjustable Computer Tower Stand. It’s pricey, but it’s an excellent multi-purpose product that offers extra storage and will fit even the largest full-towers.

All the best!